License Plate mounted to rack in stowed position.
License Plate Bar mounted onto a license plate
License Plate Kit mounted to rack in hauling position.
Close up of retractable pin.
Tray Mount License Plate kit parts

Tray Mount License Plate Kit

$79.00

Easily move your license plate back and forth from your vehicle to the bike rack tray for greater visibility. Tilt the license plate depending on the position of the bike rack.

7 in stock

SKU: 8023 Category:

Description

When ordered at the same time as a rack, the rack will ship with the license plate kit already attached under the left-hand tray.

Includes all parts to mount your license plate to the bike rack tray and to your FIRST vehicle:

  • License Plate Bracket for the rack
  • License Plate Bracket for your vehicle
  • License Plate Tray Brackets for attaching to underside of the bike tray

If you want to order a License Plate Bracket for another vehicle, click HERE. This is handy if you frequently switch your rack between vehicles.

If you would like additional License Plate Tray Brackets, you can order them HERE. You might need these if yours got lost or you want the option of moving your license plate to a different tray.

If you would like an additional vehicle bracket, click HERE.

 

 

Weight and Dimensions

  • Product weight .425 pounds
  • Shipping weight .6 pounds
  • Dimensions 10″x1″x1.5″
  • Shipping dimensions 12”x3”x3”

 

Specifications

  • Kit Type – Includes all parts to mount license plate to rack tray and to your FIRST vehicle
  • Primary Material – Aluminum
  • What’s Included – License plate bracket for the rack, license plate bracket for your vehicle, mounting brackets for attaching to underside of the bike tray
  • Assembly Required – Yes
  • Suggested Number of People Required for Assembly/Installation – 1
  • Tools Required – Phillips-head screwdriver
  • Product Care – Clean with soap and water
  • Product Warranty – Limited lifetime warranty when used as instructed and with no modifications. Individual parts and instructions for repairs available upon request.

 

More About This Product

When the license plate is on the bike rack, this kit allows it to be tilted to work with the rack in the vertical position or carrying position.

Note: There is no need to move the license plate further out with attached Add-Ons or when carrying the ramp accessory. Drivers behind you will be able to see your license plate when it is attached to the first bike rack tray. However, you can order additional Tray Mount Brackets here if you would like.

 

Customer Reviews

Based on 13 reviews
85%
(11)
8%
(1)
8%
(1)
0%
(0)
0%
(0)
100.0
E
Eric Axford
Rattling locks

Hey Nigel, The solution that I found works the best for the rattling locks is to put a thin O ring on the wheel lock shaft. After inserting the shaft, just lock in the normal fashion. O ring takes up the extra room. No more rattle

N
Nigel
Pefect fit, but rattles.

It's aluminum on aluminum, so when driving there is a rattle coming from the rack. Without the locks, it's dead silent. The tolerances are pretty tight to avoid anyone tampering, It's just enough wiggle room to be constantly vibrating and I find it loud. I definitely know when I have the locks installed. I don't want to put the locks on when I leave my car and then take them off when I'm driving. I think it could use some sort of gasket or rubber pad to absorb some of the vibrations which would go a long way to reduce or eliminate the noise.

M
Mr. Hoot
It’s a Voile strap, without the metal buckle

Which I’d realized what it was before spending $30 on 2 of them. It’s a rebranded Voile strap that is commonly available to the public. But it doesn’t have the metal buckle that Quikrstuff shows in the picture. It’s a nylon buckle and they’re marked up 50% over the retail cost. It should come with the bike rack as a feature.

I’ve read and reviewed the Judge.me’s terms, privacy and content policies and this review meets the requirements as agreed to.

User picture

Hello Mr. Hoot! Thank you for taking the time to write a review. We chose this strap to put our brand on because it is made in the USA, something we value. Yes, people can get them other places, but most customers are so happy that we sell them and that they can just get everything they need all in one place. The strap does NOT have a metal buckle and a metal buckle is not shown in the product description nor anywhere else on our website. Please, if the picture with a metal buckle (that you mention) is actually on our website, let us know; we will need to remove it. As far as 'it should come with the bike rack' - absolutely not. The rack will hold almost all bikes with no straps necessary. That's why it's called the Quik Rack! The only reason to buy a strap is if you're going to haul heavy ebikes with fenders, as explained in our fender FAQ - https://quikrstuff.com/faqs/?Display_FAQ=3484 - or if you'd like to use this awesome strap for some other reason (like holding your skis together).

B
Bruce Mitchell
Better than I'd hoped

Super convenient and just enough security when I want to leave the bike on the rack as I run into a coffee shop. I use it all the time. I'm gonna buy a couple more.

H
Hannah Catt
Great lock!

I am very glad I purchased this to go with my rack. The lock is so simple to use, and very easy to store when it’s not needed. It fits perfectly on the rack and is clearly very durable and secure. I typically will use this along with a cable lock to secure both sides of my bike, and I’m very happy with the lock and how it is keyed the same as my rack.

123